The ARCTURUS Computer Developed at Sydney University in the 1960s

[State of Electronics] have released their latest video about ARCTURUS, the 14th video in their series The Computer History of Australia.

ARCTURUS was a research computer system developed on a shoestring budget at Sydney University in the 1960s, and was in service until 1975. Particularly the system was developed by [David Wong] as a part of his PhD thesis: The design and construction of the digital computers snocom, nimbus and arcturus (PDF). [David] worked in collaboration with [Kevin R. Rosolen] who is interviewed in the video.

The machine is described as a fixed-point, binary, parallel, single address, general-purpose digital computer using packaged diode-transistor circuits. Ferrite-core memory was used instead of drum memory because drum memory was too slow and performance was a high priority feature. For the same reason parallel features were implemented where serial might have been done more simply, if it hadn’t been so slow. In addition to the ferrite-core there were paper-tape peripherals and control panels.

The machine supported 32 distinct instructions and had a 13-bit address space allowing it to directly address 8,192 words, each word comprising 20-bits. Those word bits were one sign bit and nineteen magnitude bits for fixed-point two’s complement binary numbers.

We covered The Computer History of Australia by [State of Electronics] back when they released their 5th video in the series, Australia’s Silliac Computer, if you’re interested in more history of computing in Australia.

youtube.com/embed/h7cw7BNOZ-Y?…

hackaday.com/2026/01/12/the-ar…

Electronic Nose Sniffs out Mold

It turns out, that mold is everywhere. The problem is when it becomes too much, as mold infestations can have serious health effects on both humans and animals. Remediation is extremely expensive, too. So there are plenty of benefits to finding mold early. Now, German researchers are proposing an electronic “nose” that uses UV-activated tin oxide nanowires that change resistance in the presence of certain chemicals, and they say it can detect two common indoor mold species.

The nanowire sensors can detect Staachybotrys chartarum and Chaetominum globosum. The real work, though, is in the math used to determine positive versus negative results.

Traditional methods take some sort of physical sample that is sent to a lab and require days to process. However, trained dogs can also smell mold, but as you might expect, there aren’t many dogs trained to find mold. Besides, the training is expensive, you have to maintain the dog all the time, and if the dog knows what kind of mold it is, it can’t say. So an electronic nose that can give fast, specific results is quite attractive.

Even if you don’t care about mold, the data crunching to classify the sensor data has application to many types of sensors. They used training to build multiple models, then they combine the outputs using a regression algorithm to predict the true output. Finally, they use a majority voting technique to combine the results of the model and the regression output.

Could you make a sensor like this? Reading section 4.2 of the paper, it looks like you need a pretty stout set of lab gear to play. But the math ideas are certainly something you could replicate or use as a starting point for your own sensor fusion projects.

Want a deep dive into sensor fusion? You should have been at the Hackaday Superconference a few years ago. Luckily, you can still watch [Christal’s] talk about fusing multiple streams of sensor data.

hackaday.com/2026/01/12/electr…

Optimizing a Desktop, 3D Printed Wind Tunnel

You’ve heard of wind tunnels– get some airflow going over a thingy, put some some smoke on, and voila! Flow visualization. How hard could it be? Well, as always, the devil is in the details and [toast] is down in there with him with this Hot-Wheels sized wind tunnel video.

To get good, laminar flow inside of a wind tunnel, there are important ratios to be followed– the inlet and outlet diameters must relate to the interior size to get the correct slope on the contraction and exhaust cones. You need a flow straightener on both ends. All of it can be easily 3D printed, as [toast] shows, but you have to know those design rules and pay attention to, which [toast] does… this time. One of his “don’t do this” examples in this video is previous build of his where he did not follow all the rules, and the difference is clear.

Now, unless you’re hooked on flow visualizations —guilty— or are a Hot-Wheels aficionado, since that’s what this wind tunnel is sized for, you probably won’t rush to gumroad to buy [toast]’s STLs. On the other hand, if you pay attention to the lessons [toast] has learned in this video you can apply them to wind tunnels of whatever size and construction technique you need, be it cardboard or junk box plastic and get a more stable result.

youtube.com/embed/D60PdZJggyk?…

hackaday.com/2026/01/12/optimi…

The Distroless Linux Future May Be Coming

Over the decades the number of Linux distributions has effectively exploded, from a handful in the late ’90s to quite literally hundreds today, not counting minor variations. There lately seems to be a counter-movement brewing in response to this fragmentation, with Project Bluefin’s Distroless project being the latest addition here. Also notable are KDE’s efforts, with KDE Linux as its own top-down KDE-based distro, but now with a switch to BuildStream from Arch likely as a distroless move.

It should be clear that there is no obvious course here yet, and that opinions are very much divided. The idea of ‘Linux’ becoming a more singular OS appeals to some, while to others it’s the antithesis of what ‘Linux’ is about. This much becomes clear in [Brodie Robertson]’s exploration of this topic as well.

The way to think about ‘distroless’ is that there is a common base using the Freedesktop SDK on which the customization layer is applied, such as Bluefin, KDE or Gnome’s environments. You could think of this base as the common runtime, using the Freedesktop standards for interoperability for a user-selected layer that’s installed on top. This way the idea of basing a distro on a specific distro is tossed out in favor of something that’s vaguely reminiscent of the Linux Standard Base attempt at standardization.

It’ll be fascinating to see how things will move from here, as there are definite arguments to be made in favor of less fragmentation and resultingly less duplicated effort. In many ways this would bring Linux closer to for example FreeBSD, which avoids the Linux Chaos Vortex problem by having a singular codebase. FreeBSD ‘distros’ like GhostBSD and NomadBSD are therefore essentially just specialized customizations that target a sub-group of FreeBSD users.

Of course, when we start talking about package managers and other base-distro specific features, we may very well risk igniting the same problems that tore apart the LSB so many years ago. Will we also standardize on RPM over DEB package files and kin, or something else?

youtube.com/embed/k6qCtIHFu_c?…

hackaday.com/2026/01/12/the-di…

Michelson Interferometer Comes Home Cheap

We suspect there are three kinds of people in the world. People who have access to a Michelson Interferometer and are glad, those who don’t have one and don’t know what one is, and a very small number of people who want one but don’t have one. But since [Longest Path Search] built one using 3D printing, maybe the third group will dwindle down to nothing.

If you are in the second camp, a Michelson interferometer is a device for measuring very small changes in the length of optical paths (oversimplifying, a distance). It does this by splitting a laser into two parts. One part reflects off a mirror at a fixed distance from the splitter. The other reflects off another, often movable, mirror. The beam splitter also recombines the two beams when they reflect back, producing an interference pattern that varies with differences in the path length between the splitter and the mirror. For example, if the air between the splitter and one mirror changes temperature, the change in the refraction index will cause a minute difference in the beam, which will show up using this instrument.

The device has been used to detect gravitational waves, study the sun and the upper atmosphere, and also helped disprove the theory that light is transmitted through a medium known as luminiferous aether.

The tolerances for such a device are tight, but within the capability of modern 3D printers. The CAD files are online. The key was the mirror mounts, which use springs and thumbscrews. So you do need some hardware and, oh yeah, a laser, although that’s not as hard to obtain as it once was. You obviously can’t 3D print the mirrors or the beam splitter either.

The post claims the device is cheap because the bill of materials was roughly $3, although that didn’t include the beamsplitter, which would bring the cost up to maybe $20. The device, in theory, could detect distance changes as small as one wavelength of the laser, which is around 650nm. Not bad for a few bucks.

Not all Michelsons use lasers. The man behind the Michelson instrument also worked out how to do Fourier analysis with a mechanical computer.

hackaday.com/2026/01/12/michel…

Keebin’ with Kristina: the One with the Cheap-O Keyboard

All right, I’ll cut to the chase: Cheap03xD is mainly so cheap because the PCB falls within a 10 x 10 cm footprint. The point was to make a very affordable keyboard — all the parts come to ~40 Euro (~$47). So it would seem that [Lander03xD_] succeeded.

Image by [Lander03xD_] via redditCheap03xD is all the things — 36-key, split, column-staggered, wireless, hot-swappable, and uses ZMK. The batteries are easily replaceable, and no they don’t get in the way.

Those are MMD Princess silent switches, which I wouldn’t choose, but [Lander03xD_] is taking this board to the office, so I get it. They sure are a nice shade of pink, anyway, and they go really well with the pastels of the DSA keycaps and the bezel.

One cool thing to note is that the PCBs are reversible, like the ErgoDox. This isn’t [Lander03xD_]’s first board, and it won’t be the last.

Now, let’s talk batteries. [Saixos] pointed out that the design doesn’t appear to include a protection circuit. In case you can’t tell from where you’re sitting, those are nice!nano clones that [Lander03xD_] is using, and they expect a protection circuit.

[Lander03xD_] is going to look through the docs and see what’s what. The goal is not to have any daughter boards, so this may take some rethinking.

Via reddit

Arc Raiders Keyboard Looks the Part

So Arc Raiders is this cool-looking, stripe-logoed, multiplayer extraction shooter that just came out a couple of months ago for all the platforms. It’s not something I could personally play as it’s way too immersive (read: time-consuming), but it definitely looks good, much like this keyboard that [RunRunAndyRun] designed to play it.

Image by [RunRunAndyRun] via redditHaving enjoyed the game with a game pad for a couple of weeks, [RunRunAndyRun] longed for the precision of a keyboard and mouse. The only problem was that his stock of split keyboards all lack a number row.

No matter; just make a new one. Why not? This rustic beauty runs on the Waveshare RP2040 Zero. The case was 3D printed on a Prusa Mk4, which you’d never know unless you blew up the picture. And then [RunRunAndyRun] gave it that nice patina using Panduro hobby acrylics and a bit of weathering powder.

For now, it’s working pretty well, though [RunRunAndyRun] is still perfecting the keymap. If you’d like to build one yourself, the STLs are available here, and the firmware is on GitHub.

Thanks for the tip, [John]!

The Centerfold: Witch’s Brew

Image by [CaptLynx] via redditThis stunning beauty, Witch’s Brew, was created by [CaptLynx] with the Cosmos keyboard configurator. Doesn’t sound familiar? It’s the one that uses a scan of your hand to create your ultimate comfort. This keyboard is a custom build for a commission. I must say, as much as I dislike the work of Jackson Pollock, I do absolutely love the spatter on those keycaps.

Do you rock a sweet set of peripherals on a screamin’ desk pad? Send me a picture along with your handle and all the gory details, and you could be featured here!

Historical Clackers: the Keystone

Image via The Antikey Chop
This spartan beauty was named after the state in which it was made, Pennsylvania. Manufactured between 1898 and 1903, the Keystone was invented by William Prehn Quentell.

Quentell was living in Kansas City, MO when he first applied for a patent, and later moved to the east coast. At the time, the machine was nameless. The patent looks nothing like the finished product pictured here, but the genesis of the key feature of this “poor man’s Hammond” is there — the swinging type sector.

What this means is that the Keystone has its type on a half wagon wheel, which is evident in the patent drawing. The glyphs are molded around the outside edge of the wheel, which gets rotated into the correct position with each keystroke. This type wheel could be easily changed out for different fonts.
Image via Google Patents
To imprint the paper, a spring-driven hammer strikes from behind, pushing the paper and ribbon against the type wheel. The paper is loaded into a cylindrical holder in the rear, and unfurls as one types.

So, why was it a poor man’s Hammond? Well, for one, the patent image looks like a Hammond. But the poor part is felt the hardest in the makeup of the typewriter.

In the early Keystone examples, the carriage rails were made of pig iron. Why? It’s a simple case of lateral integration. The factory that was retrofitted to manufacture the machine had previously been the Lochiel iron mill, a producer of pig iron. They were just using up old stock, I imagine.

The Keystone featured two Shift keys on the left, one for Caps and one for Figures. It was a comparatively inexpensive at $40, and then later, $35 (around $1,200 today).

Production was supposed to begin in May of 1898. But by June of ’99, “the company has been unable to fill the orders which are piling up at the works.” Sounds like your average Kickstarter. Quentell was already working on his next project by 1902, the Postal typewriter.

Finally, a Keyboard That Charges Your Phone

So this article mainly centers on the new little Blackberry-esque number from Clicks which might just be my next phone, except that it doesn’t actually telephone. Clicks is meant to be your second phone, the one you use for emailing and such. You can pre-order it for $399 if you put a $199 deposit down before February 27th. If you decide to drop the full four hundo as an early bird, you’ll get two additional back covers, which slightly change the look of the phone.
Image by Clicks via TechCrunch
But I’d like to talk about the add-on Power Keyboard for smart phones that Clicks is also dropping at CES this year. Do you miss your Sidekick? Well, here’s a sliding keyboard with multiple positions for differently-sized smart phones, tablets, and even smart TVs. (Because forget typing with the remote control.)

It uses a 2,150 mAh battery and attaches via MagSafe or Qi2, but it also can be used with the case on. When paired with a smart TV, you just use it by itself. Honestly, it looks kind of hard to type on without the phone for support. But I don’t use the smart features of my TV, so whatever.

Honestly, I will probably start by getting the keyboard, which is $79 for early birds through their site, and $109 later on. Pre-orders started a week ago, so I guess I should get on that.

Got a hot tip that has like, anything to do with keyboards? Help me out by sending in a link or two. Don’t want all the Hackaday scribes to see it? Feel free to email me directly.

hackaday.com/2026/01/12/keebin…

Chasing The Coca-Cola Recipe

One of the most widely recognised product brands in the world is probably Coca-Cola, and its formula is famously kept a secret through precautions that probably rival those of many nation states. There are other colas, and there are many amateurs who have tried to copy Coke’s flavour, but in well over a century, nobody has managed it. Why does [LabCoatz] think his attempt will be successful where others failed? He has friends with their own mass spectrometers.

‘The video below the break is a nearly half-hour exploration into food chemistry and the flavour profile of the well-known soft drink. It’s easy to name many of the ingredients, but some, such as acetic acid, are unexpected. Replicating the contribution from Coke’s de-cocainised coca leaf extract requires the purchase of some of the constituent chemicals in pure form. Its value lies in showing us how flavour profiles are built up, and the analytical methods used in their decoding.

He makes the point that Coke has never patented the formula because to do so would reveal it, but perhaps in that lies the real point. The value in a secret formula for brands such as Coke lies not in the secret itself, as it’s not difficult to make a refreshing cola drink. Instead, it’s the mystique of their product having a secret recipe that matters. Since this isn’t the recipe itself but something that’s supposed to taste a lot like it, that mystique stays intact. He’s not positioning his Lab-Cola as the real thing, so while we might have used a different label colour and font just to make sure, we’re guessing he’s safe from the lawyers. If you’re interested in the legal grey areas surrounding perceived infringement, though, it’s a topic we’ve looked at before.

youtube.com/embed/TDkH3EbWTYc?…

Thanks [Hans] for the tip!

hackaday.com/2026/01/12/chasin…

La civiltà dei dati. Rivista

Civiltà dei dati è una bella rivista. Prosecuzione ideale della Civiltà delle macchine che dal 1953 al 1979 ha contribuito a modellare la cultura dell’innovazione nel nostro paese, aspira oggi come allora a intrecciare il dialogo tra scienza, tecnologica e sperimentazione letteraria e artistica con un focus specifico sull’ontologia del dato. Proprio quel dato che consente scelte e previsioni, il dato che ci anticipa e rappresenta nel mondo digitale e che è il carburante delle nuove macchine IA è il centro e al centro della rivista. Diretta da Jaime D’Alessandro, storica penna tecnologica dell’Espresso e di Repubblica, è un contenitore di alcune delle migliori firme del pensiero contemporaneo in lingua italiana, Floridi, Taddeo, Benanti, Aresu, e del giornalismo tech come Iacona, Aluffi, Sterling e altri. I primi quattro numeri della rivista, frutto di un progetto della Fondazione Leonardo, direttrice generale la giornalista Helga Cossu, sono stati dedicati a quattro grandi temi d’attualità: lo spazio, la mente, gli archivi, l’IA e i digital twins.

La rivista è molto curata, sia dal punto di vista grafico, con una chiara impronta visiva, sia per i contenuti.

Il primo numero è una parata delle stelle femminili protagoniste della ricerca spaziale; il secondo, è incentrato sugli effetti psicologici della tecnologia e dei social network; il terzo si fonda sul rapporto tra analogico e digitale per parlare di archivi. Particolarmente interessanti sono le riflessioni di Paolo Benanti in questo numero tre quando parla dell’importanza della memoria selettiva, cioè di quel processo che è umano ma non macchinico, di ritenere solo quello che serve, come accadeva con le biblioteche. Benanti fa anche un riferimento importante all’etica dell’IA quando ricorda che gli strumenti, tutti gli strumenti, non sono neutri, ma forme d’ordine e disposizioni di potere. Nella rivista numero 4 va letta l’intervista a Lucilla Sioli, direttrice dell’ufficio europeo per l’IA. Detto per inciso è quella graficamente più bella (recupera le copertine di Urania). Ma è sempre nel numero 3 che troviamo la chicca: una storia a fumetti dell’impareggiabile Milo Manara basato sulla storia della biblioteca meccanica di Jorge Luis Borges. Chissà se quell’utopia bella e terribile della macchina da scrivere universale, oggi rappresentata dall’IA generativa, potrà mai predirci il futuro dentro a un libro. Accetteremmo anche qualche errore di sintassi.

«Civiltà dei dati. 2025. Fondazione Leonardo. Direttore Jaime D’Alessandro». Nella foto i primi quattro numeri.

dicorinto.it/articoli/la-civil…

Drive 1024×600 Pixels via I2C with an ATtiny85

If you need to drive a big screen for a project, it’s fair to say your first thought isn’t going to be to use the ATtiny85. With just 512 bytes of RAM and 8 kilobytes of flash memory, the 8-bit micro seems a little cramped to drive, say, a 10″ screen. Yet that’s exactly what [ToSStudio] is doing with TinyTFT_LT7683: 1024 x 600 pixels of TFT goodness, over I2C no less.
With the right TFT controller, this little micro-controller can do magic.
The name kind of gives away the secret: it won’t work on just any TFT display. It’s using properties of the LT7683 display driver, though if you don’t have one of those, the RA8875 is also compatible. Those drivers can take more than just a pixel stream– a good thing, since you’d be hard pressed to get that many pixels streaming from an ATtiny. These are character/graphic display drivers, which means you can get them to draw both characters and graphics on the screen if you speak the lingo.

It’s still not blazing fast; the documentation suggests “static or moderately dynamic UIs” as the suggested use case, and a clock is of the pre-programmed examples. From that, we can surmise that you can get 1 FPS or better with this code. You’re limited both by the simple micro-controller and the bandwidth of the I2C bus, but within those limits this seems like a very powerful technique.

This isn’t the first ATtiny graphics library to blow our minds, but if you really want an impressive graphics demo from the little micro that could, you really need to race the beam.

Thanks to [Thomas Scherer] for the tip!

hackaday.com/2026/01/08/drive-…

Il Power Ranger Rosa che ha buttato giù il “Tinder dei nazisti”: i dati sono potere

Al Chaos Communication Congress di Amburgo, un’hacker tedesca che si fa chiamare Martha Root si è presentata vestita da Power Ranger Rosa e ha cancellato in diretta tre siti suprematisti bianchi, tra cui WhiteDate, noto come “il Tinder dei suprematisti”

informapirata.it/2026/01/09/il…

br1brown

2026-01-09 15:44:14

Il Power Ranger Rosa che ha buttato giù il “Tinder dei nazisti”: i dati sono potere

Al Chaos Communication Congress di Amburgo, un’hacker tedesca che si fa chiamare Martha Root si è presentata vestita da Power Ranger Rosa e ha cancellato in diretta tre siti suprematisti bianchi, tra cui WhiteDate, noto come “il Tinder dei suprematisti”

Al Chaos Communication Congress di Amburgo, un’hacker tedesca che si fa chiamare Martha Root si è presentata vestita da Power Ranger Rosa e ha cancellato in diretta tre siti suprematisti bianchi, tra cui WhiteDate, noto come “il Tinder dei suprematisti”.

twitter.com/i/status/200718388…

Fichissimo, applausi. Eppure serve farsi delle domande.

Martha era dentro da mesi. Aveva messo in piedi profili fasulli di donne ariane gestiti da chatbot e racconta che quegli uomini si erano innamorati. Mentre gli utenti flirtavano con l’intelligenza artificiale, lei raccoglieva dati e informazioni, trasformando un ambiente pensato per far incontrare persone in un dispositivo che espone identità e reti. Dalle sue analisi è emerso che la piattaforma era gestita da una persona con legami con ambienti suprematisti bianchi. WhiteDate veniva venduto come sito di appuntamenti, ma gli utenti erano quasi tutti uomini: il punto non pare la ricerca di partner, ma la costruzione di un network suprematista travestito da Tinder per ariani.

I membri della cosiddetta razza superiore si sono fatti fregare lasciando il sito senza protezioni adeguate. Un’infrastruttura che classifica, aggrega e rende operativi dati sensibili produce una forma di soft power che, se progettata male, si ribalta in una falla boomerang. Il Power Ranger Rosa non si è fermata alla distruzione: ha reso consultabili su okstupid.lol informazioni filtrate, mentre il dataset completo è stato condiviso attraverso canali dedicati a giornalisti e ricercatori. Esporre quei dati significa raccontare le persone: chi c’è dentro, come si descrive, come si colloca nello spazio, cosa cerca, a quale oggetto storico dichiara appartenenza.

WhiteDate stava in una galassia di siti tematici: WhiteDate (dating), WhiteChild (famiglia, ancestry e donazioni di sperma/uova per suprematisti bianchi) e WhiteDeal (networking professionale per razzisti).

Ed è interessante, non per i nazisti e basta. Perché quello che Martha Root ha mostrato non è che “la sicurezza faceva schifo” e stop, ma che un’infrastruttura di matching è, di fatto, una macchina che rende operativi dati sensibili: identità, preferenze, reti, geografia, appartenenze. E quando quella macchina si rompe, il potere che di solito esercita in silenzio diventa visibile.

Il punto è che non servono confessioni esplicite. Bastano i data proxy: segnali indiretti che, incrociati, ti profilano. Se mangio kosher “divento” ebreo nei modelli; se segno tutte le moschee “divento” musulmano; se posto “Black Lives Matter” finisco letto in modo diverso anche da sistemi assicurativi. È profilazione per deduzione: il dato sensibile non lo dichiari, lo lasci emergere dai contorni.

Per questo le policy non sono una cintura di sicurezza: cambiano, si reinterpretano, si aggirano. Il design invece è la decisione politica incorporata nell’architettura: cosa si collega, cosa si correla, cosa si esporta. Se una correlazione è tecnicamente possibile, prima o poi qualcuno la farà. È lo stesso motivo per cui, quando guardo infrastrutture pubbliche, mi interessa l’architettura politica oltre a quella tecnica: lo SPID nasceva con un’idea più decentralizzata proprio per evitare correlazioni tra Stato, portali e autenticazioni. Poi si è cambiata impostazione.

E la parte più inquietante è che non serve nemmeno un WhiteDate. Noi ci autoprofiliamo ogni giorno: i social sono un flusso continuo di segnali, e i metadati in foto e video sono boe, a volte coordinate vicino casa, con ricadute anche su chi vive con noi. Zuboff lo chiama capitalismo della sorveglianza: una raccolta diffusa in cui non sai quante aziende ti prendono, come ti incrociano e in quali liste finisci. Okstupid.lol è la versione “con la luce accesa”: lo stesso principio reso pubblico. Di norma le liste sono invisibili: non meno reali, meno consultabili.

okstupid.lol è spettacolare. Ma il suo spettacolo è una dimostrazione tecnica di quanto sia facile classificare e aggregare quando l’infrastruttura lo permette. E questa facilità, storicamente, non resta neutra. In Ruanda nel 1994 lo sterminio dei Tutsi fu facilitato anche da carte d’identità che classificavano le persone in base all’etnia. Negli anni Quaranta, dati del censimento vennero usati per localizzare e supportare misure di sorveglianza e internamento di persone di ascendenza giapponese dopo Pearl Harbor.

La tecnologia è un apparato amministrativo e informazionale piegato agli scopi di chi la possiede e del contesto politico. E il contesto politico cambia più velocemente delle policy. Per quanto apprezzi Martha Root, non la leggo come uno show: è un promemoria. Il potere dominante queste capacità le ha già, senza Power Ranger, senza exploit, con procedure, contratti standard e con quella cosa che mi piace tanto ma che in certi casi è un problema: l’interoperabilità.

Per approfondire

• okstupid.lol – whitedate, leaked
• Hacktivist deletes white supremacist websites live onstage during hacker conference | TechCrunch
• Woman Hacks “Tinder for Nazis,” Tricks the Racist Users Into Falling in Love With AI Chatbots
• Hacktivist Deletes White Supremacist Websites At Conference

@pirati

Vuoi segnalare un errore o dare un suggerimento? Scrivici su Friendica, Twitter, Mastodon o sul gruppo telegram Comunicazione Pirata

Segui il canale di InformaPirata
informapirata.it/2026/01/09/il…#ChaosComputerClub #MarthaRootinformapirata.it/2026/01/09/il…

Hacktivist Deletes White Supremacist Websites at Conference

A hacktivist exposed and deleted three white supremacist websites during a presentation at a conference last week.

^{Paul Shread (The Cyber Express)}

Post di prova da Raccoon

Questo è un post di prova pubblicato dall’app Raccoon, dopo l’installazione del plugin #WordPress Enable mastodon app, una soluzione che implementa in un…

informapirata.it/2025/12/04/po…

informapirata

2025-12-04 15:04:36

Post di prova da Raccoon

Questo è un post di prova pubblicato dall’app Raccoon, dopo l’installazione del plugin #WordPress Enable mastodon app, una soluzione che implementa in un qualsiasi sito Wordpress le API di mastodon.

Obiettivi

L’obiettivo è capire se i tag di formattazione presenti su Raccoon, come quelli del grassetto, del corsivo, del sottolineato, del testo monospazio e del barrato, funzionano.

Vorrei […]

Questo è un post di prova pubblicato dall’app Raccoon, dopo l’installazione del plugin #WordPress Enable mastodon app, una soluzione che implementa in un qualsiasi sito WordPress le API di mastodon.

Obiettivi

L’obiettivo è capire se i tag di formattazione presenti su Raccoon, come quelli del grassetto, del corsivo, del sottolineato, del testo monospazio e del barrato, funzionano.

Vorrei provare anche le citazioni ma non so bene quale tag utilizzare…

…quindi Ne utilizzo due.

Vediamo invece se funzionano le menzioni e come vanno trattate:

@test

@test

Allego anche un’immagine per capire come verrà visualizzata su WordPress

#Activitypub #Raccoon

informapirata.it/2025/12/04/po…

#ActivityPub #Raccoon #wordpress

informapirata.it/2025/12/04/po…

Enable Mastodon Apps

Allow accessing your WordPress with Mastodon clients. Just enter your own blog URL as your instance.

^{WordPress.org}